Vieweg All-Metal Dispensing Needle, 3 cannulas, 0.28 mm, G24, L20 mm

Product detailed description

Vieweg All-Metal Dispensing Needle, 3 cannulas, 0.28 mm, G24, L20 mm

All-metal Vieweg dispensing needle with 3 stainless steel 1.4301 cannulas in a nickel-plated brass hub, Luer-Lock thread. The multiple cannulas apply 3 parallel dots or beads at once, speeding up dispensing on repeated positions. With no plastic parts it withstands solvents and temperature and is reusable.

A 0.28 mm (Gauge 24) bore is the right choice where a small, well-defined dot is needed: flux, conformal coatings, thin adhesives and placement of small SMD parts. The longer 20 mm cannula reaches between taller components, into grooves and around edges.

For a finer deposit choose G25 (0.25 mm) from the same range; for thicker media or higher flow choose G22 (0.40 mm). The same bore is also available with 2 and 4 cannulas. The Luer-Lock thread fits standard dispensing cartridges and syringes from 3 to 55 ml as well as dispensing valves with this connection.

Price per piece.

Key specifications

• Manufacturer: Vieweg
• Manufacturer part no.: 501572 (561352-3)
• Type: All-metal dispensing needle
• Inner diameter: 0.28 mm (Gauge 24)
• Outer diameter: 0.55 mm
• Needle length: 20 mm
• Connector: Luer-Lock
• Material: nickel-plated brass (hub), stainless steel 1.4301 (cannula)

Use and selection

3 cannulas allow material to be dispensed at several points simultaneously. Choose the bore and length to suit the material, required deposit and access to the component.