Soldering equipment — soldering stations and tips JBC, Weller, QUICK

Compact BOFA V200 solder fume extraction unit. Three-stage filtration with HEPA filter (99.97% efficiency), noise level below 55 dB, continuous power regulation for 1–2...

Compact BOFA V250 solder fume extraction unit. Three-stage filtration with HEPA filter (99.97% efficiency), noise level below 55 dB, continuous power regulation for 1–2...

Hot Air Nozzle Q02. Hot air nozzle Q02 for soldering stations.

Hot Air Nozzle Q04. Hot air nozzle Q04 for soldering stations.

JBC 0008446 – exhaust filter for the MVE module. Replacement filter for the exhaust path of the MVE pneumatic desoldering module.

JBC 0008473 – filter for DS360 desoldering tool. The replaceable filter traps debris in the suction path. Regular flow checks help maintain effective solder extraction.

JBC 0780840 – filter for DR560 desoldering tool. The replaceable filter traps debris in the suction path. Regular flow checks help maintain effective solder extraction.

JBC 55N PULSMATIC – solder-feed iron 230 V. The trigger feeds solder wire directly to the tip, freeing the other hand to hold a component or cable.

JBC A2330 – silicone suction tube. The tube connects vacuum accessories used to lift components during hot-air desoldering.

JBC ADS – stand for T210 / T245. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC ALE – automatic-feed soldering control unit. Sets wire feed speed and length in continuous, discontinuous or programmed operation.

JBC ALE – automatic-feed soldering station. Combines controlled soldering tip heating with automatic wire delivery to the joint.

JBC ALE250 – automatic-feed soldering iron. Feeds wire to the joint according to ALE control settings. Select the guide for the wire diameter and joint access.

JBC ALES – stand for ALE250. The stand accommodates the automatic-feed soldering iron and its wire guide.

JBC ALI – handsfree soldering stand. Holds ALE250 for two-handed cable and connector soldering. Integrated extraction connects to an external suction system.

JBC AM120 – adjustable micro thermal tweezers. Vertical and rotational tip adjustment aligns both contact faces for desoldering small SMD components.

JBC AMS – stand for AM120 / PA120. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC AN115 – adjustable nano thermal tweezers. Vertical tip alignment helps both tips contact very small components during microscope rework.

JBC AP250 – manual-feed soldering iron. The trigger dispenses solder to the tip with one hand. An anti-rotation screw keeps the cartridge aligned with the wire guide.

JBC APS – stand for AP250. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC AT420 – adjustable thermal tweezers. Rotational and vertical working-end alignment adapts contact to QFP, PLCC and SOIC leads.

JBC ATS – stand for AT420. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC BES – solder reel stand. An adjustable brake controls wire unwinding resistance. The stand supports two orientations and can be fixed to the bench.

JBC C105101: conical tip Ø 0.1 mm. The conical end provides point contact with an individual solder joint. For JBC tools NT105, NP105.

JBC C105103: conical tip Ø 0.3 mm. The conical end provides point contact with an individual solder joint. For JBC tools NT105, NP105.

JBC C105105: bent conical tip Ø 0.3 mm. The bent end provides angled access to the joint. For JBC tools NT105, NP105.

JBC C105106: conical tip Ø 0.5 mm. The conical end provides point contact with an individual solder joint. For JBC tools NT105, NP105.

JBC C105107: conical tip Ø 0.8 mm. The conical end provides point contact with an individual solder joint. For JBC tools NT105, NP105.

JBC C105108: chisel tip 0.6 × 0.3 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools NT105, NP105.

JBC C105109: bevel tip Ø 0.6 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools NT105, NP105.

JBC C105110: bent conical tip Ø 0.5 mm. The bent end provides angled access to the joint. For JBC tools NT105, NP105.

JBC C105111: blade tip 3.5 × 0.7 mm. The broad blade provides contact along an extended soldering area. For JBC tools NT105, NP105.

JBC C105112: knife tip 2.5 × 0.3 mm. The knife profile combines a narrow edge with an elongated soldering face. For JBC tools NT105, NP105.

JBC C105113: chisel tip 1 × 0.3 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools NT105, NP105.

JBC C105114: chisel tip 1.8 × 0.5 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools NT105, NP105.

JBC C105115: coating removal tip. The tip removes coatings during electronics rework. It is not intended for soldering. For JBC tools NT105, NP105.

JBC C105116: chisel tip 0.2 × 0.1 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools NT105, NP105.

JBC C105117: chisel tip 0.4 × 0.2 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools NT105, NP105.

JBC C105118: bent conical tip Ø 0.1 mm. The bent end provides angled access to the joint. For JBC tools NT105, NP105.

JBC C105120: knife tip 1 × 0.2 mm. The knife profile combines a narrow edge with an elongated soldering face. For JBC tools NT105, NP105.

JBC C105124: bent conical tip Ø 0.1 mm. The bent end provides angled access to the joint. For JBC tools NT105, NP105.

JBC C105125: chisel tip 1 × 0.2 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools NT105, NP105.

JBC C105126: conical tip Ø 0.1 mm. The conical end provides point contact with an individual solder joint. For JBC tools NT105, NP105.

JBC C105127: bevel tip Ø 1 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools NT105, NP105.

JBC C105128: spoon tip Ø 1 mm. The spoon-shaped recess holds solder at the working end. For JBC tools NT105, NP105.

JBC C105129: knife tip 2.8 × 0.2 mm. The knife profile combines a narrow edge with an elongated soldering face. For JBC tools NT105, NP105.

JBC C105131: chisel tip. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools NT105, NP105.

JBC C105211: blade tip 3.5 × 0.7 mm. The broad blade provides contact along an extended soldering area. For JBC tools NT105, NP105.

JBC C105212: knife tip 2.5 × 0.3 mm. The knife profile combines a narrow edge with an elongated soldering face. For JBC tools NT105, NP105.

JBC C105213: chisel tip 1 × 0.3 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools NT105, NP105.