Handpieces & Stands

JBC ADS – stand for T210 / T245. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC ALE250 – automatic-feed soldering iron. Feeds wire to the joint according to ALE control settings. Select the guide for the wire diameter and joint access.

JBC ALES – stand for ALE250. The stand accommodates the automatic-feed soldering iron and its wire guide.

JBC ALI – handsfree soldering stand. Holds ALE250 for two-handed cable and connector soldering. Integrated extraction connects to an external suction system.

JBC AM120 – adjustable micro thermal tweezers. Vertical and rotational tip adjustment aligns both contact faces for desoldering small SMD components.

JBC AMS – stand for AM120 / PA120. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC AN115 – adjustable nano thermal tweezers. Vertical tip alignment helps both tips contact very small components during microscope rework.

JBC AP250 – manual-feed soldering iron. The trigger dispenses solder to the tip with one hand. An anti-rotation screw keeps the cartridge aligned with the wire guide.

JBC APS – stand for AP250. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC AT420 – adjustable thermal tweezers. Rotational and vertical working-end alignment adapts contact to QFP, PLCC and SOIC leads.

JBC ATS – stand for AT420. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC BES – solder reel stand. An adjustable brake controls wire unwinding resistance. The stand supports two orientations and can be fixed to the bench.

JBC CTS – stabilizing solder pot stand. Stabilizes the solder pot cartridge and shields the work area with a removable tray and protective screen.

JBC DNS – stand for nitrogen soldering handles. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC DTS – stand for DT530. The holder fits the angled DT530 desoldering iron and provides a cleaner and storage for four tips.

JBC HDS – stand for T470. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC HDTS – stand for HT470. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC HT420 – thermal tweezers for SMD desoldering. Two working ends heat component leads simultaneously. Cartridge selection adapts contact to QFP, PLCC or SOIC packages.

JBC HT470 – heavy-duty thermal tweezers. Simultaneous heating with two cartridges serves large contacts, thick conductors and other thermally demanding joints.

JBC HT470K – heavy-duty thermal tweezer kit. Simultaneous heating with two cartridges serves large contacts, thick conductors and other thermally demanding joints.

JBC HTS – stand for HT420. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC JTS – stand for JTT hot-air tool. Parking the tool in the stand automatically stops heating. The exchanger assists hot-air nozzle handling.

JBC NAS – stand for NH nano hot-air tool. The shaped holder parks the NH precision hot-air tool at a JNA workstation.

JBC NP115 – nano thermal tweezers. Flexible arms allow delicate gripping of small components while heating opposing contacts simultaneously.

JBC NT115 – nano soldering handle. The short grip-to-tip distance supports precise control when soldering small components under a microscope.

JBC PA120 – micro thermal tweezers. Two replaceable cartridges provide simultaneous contact heating for removing small chip components.

JBC SC-C – cartridge stand and exchanger. Organizes up to 12 cartridges. Inner positions accommodate C210 and outer positions C245.

JBC SF280 – automatic wire feed handle. Feeds wire into the work area using its button or a P005 pedal. The SF unit controls the feed.

JBC SFS – stand for the SF280 handle. An adjustable holder parks the feed handle, while the cable collector keeps its cable away from the work area.

JBC SCH – cartridge and tip holder. A stable block provides 16 storage holes to organize interchangeable tips and cartridges on the bench.

JBC T210 – precision soldering handle. The short grip-to-tip distance helps guide the tool accurately when soldering small SMD components.

JBC T210N – nitrogen soldering handle for C210. Delivers nitrogen to the tip to limit oxidation during joint formation. Requires a nitrogen supply and a matching flow regulator.

JBC T210P – precision soldering handle with blue grip. The short grip-to-tip distance helps guide the tool accurately when soldering small SMD components.

JBC T245 – general purpose soldering handle. A handle for general electronics soldering and joints that draw more heat. Interchangeable cartridges adapt the working shape to the...

JBC T245G – soldering handle with reinforced cable. A handle for general electronics soldering and joints that draw more heat. Interchangeable cartridges adapt the working shape...

JBC T245N – nitrogen soldering handle for C245. Delivers nitrogen to the tip to limit oxidation during joint formation. Requires a nitrogen supply and a matching flow regulator.

JBC T245P – soldering handle with blue grip. A handle for general electronics soldering and joints that draw more heat. Interchangeable cartridges adapt the working shape to the...

JBC T260 – vacuum Pick & Place handle. Picks and places SMD components using vacuum. Connects to the suction port of a compatible hot-air station.

JBC T470 – heavy duty soldering handle. A wider grip and screw-secured cartridge assist sustained soldering on thermally demanding joints.

JBC T470F – soldering handle with thermal insulation. A wider grip and screw-secured cartridge assist sustained soldering on thermally demanding joints.

JBC T470M – insulated soldering handle with 3 m cable. A wider grip and screw-secured cartridge assist sustained soldering on thermally demanding joints.

JBC T470N – nitrogen soldering handle for C470. Delivers nitrogen to the tip to limit oxidation during joint formation. Requires a nitrogen supply and a matching flow regulator.

JBC T470S – soldering handle with 3 m cable. A wider grip and screw-secured cartridge assist sustained soldering on thermally demanding joints.

JBC T470Z – soldering handle with tri-lobed grip. A wider grip and screw-secured cartridge assist sustained soldering on thermally demanding joints.

JBC TES – stand for the TET hot-air tool. Parks TET in an adjustable holder. Enables automatic heat cut-off when parked and facilitates nozzle changes.

JBC WS140 – thermal wire stripping tweezers. Uses W140 blades to remove heat-resistant insulation. Opening and stripping length adjustments support repeatable work.

JBC WS440 – thermal wire stripping tweezers. Uses W440 blades to remove heat-resistant insulation. Opening and stripping length adjustments support repeatable work.

JBC WSB – wire stripping station with WS440. The WS440 tweezer system thermally removes resistant wire insulation. Power can be adjusted to the insulation material.

JBC WSBT – stand for WS440. The holder for WS440 wire stripping tweezers lets the station detect the parked tool and enter an energy-saving mode.

JBC WSS – wire stripping station with WS140. The WS140 tweezer system thermally removes resistant wire insulation. Power can be adjusted to the insulation material.