Rework

JBC CP – compact precision rework station. AM120 thermal tweezers grip and simultaneously heat both ends of small SMD components.

JBC DDPE – two-tool precision rework station. The precision T210 soldering handle is paired with AM120 adjustable micro tweezers for small SMD work.

JBC DDSD – rework station with DT530. The T245 soldering handle is paired with DT530 for solder extraction from through-hole leads and pad cleaning.

JBC DDSE – rework station with DR560. The T245 soldering handle is paired with DR560 for solder extraction from through-hole leads and pad cleaning.

JBC DMPSD – rework station with DT530. Combines precision and general soldering, SMD tweezers and solder extraction with the DT530 tool.

JBC DMPSE – rework station with DR560. Combines precision and general soldering, SMD tweezers and solder extraction with the DR560 tool.

JBC DMSD – rework station with DT530. The T245 soldering handle is paired with DT530 for solder extraction from through-hole leads and pad cleaning.

JBC DMSE – rework station with DR560. The T245 soldering handle is paired with DR560 for solder extraction from through-hole leads and pad cleaning.

JBC HDEK – heavy-duty HT470 rework station. Two HDE units power HT470 thermal tweezers for simultaneous heating of large contacts and thick conductors.

JBC HRL – articulated left-hand rest. Provides a movable support point near the work area for precision soldering and tweezer handling.

JBC HRR – articulated right-hand rest. Provides a movable support point near the work area for precision soldering and tweezer handling.

JBC NASE – two-tool nano rework station. The NT115 nano handle is paired with AN115 adjustable tweezers for soldering joints and lifting small SMD components.

JBC PHBE – PCB preheater. Controlled bottom heating reduces temperature differences across the board during rework. Thermocouples provide regulation and protection for the...

JBC PHBEK – preheater set with PCB support. The set combines the PHBE preheater and PHBS support for repeatable board positioning above the heating area.

JBC PHBS – adjustable PCB support. Secures the board above PHBE and supports repeatable positioning when changing assemblies for repair.

JBC PHBT – built-in frame for PHBE preheater. The frame allows the PHBE preheater and its console to be built into the worktop.

JBC PHNE – PCB preheater. Controlled bottom heating reduces temperature differences across the board during rework. Thermocouples provide regulation and protection for the...

JBC PHNEK – preheater set with PCB support. The set combines the PHNE preheater and PHNS support for repeatable board positioning above the heating area.

JBC PHNS – adjustable PCB support. Secures the board above PHNE and supports repeatable positioning when changing assemblies for repair.

JBC PHSE – PCB preheater. Controlled bottom heating reduces temperature differences across the board during rework. Thermocouples provide regulation and protection for the...

JBC PHSEK – preheater set with PCB support. The set combines the PHSE preheater and PHSS support for repeatable board positioning above the heating area.

JBC PHSMK – preheater set with rotative support. The PHSE preheater is paired with the PSS multiaxis support for rotating and positioning the board during repair.

JBC PHSS – adjustable PCB support. Secures the board above PHSE and supports repeatable positioning when changing assemblies for repair.

JBC PHST – built-in frame for PHSE preheater. The frame allows the PHSE preheater and its console to be built into the worktop.

JBC PHXLE – PCB preheater. Controlled bottom heating reduces temperature differences across the board during rework. Thermocouples provide regulation and protection for the...

JBC PHXLEK – preheater set with PCB support. The set combines the PHXLE preheater and PHXLS support for repeatable board positioning above the heating area.

JBC PHXLS – adjustable PCB support. Secures the board above PHXLE and supports repeatable positioning when changing assemblies for repair.

JBC PSS – multiaxis rotative PCB support. Flips the board through 180° to work on either side without removing it. Tilt adjustment adapts access to joints.

JBC RBB – rework bench with preheater. Combines the PHBE preheater, PHBS board support and RHB hand rest for stable work on populated PCBs.

JBC RBN – rework bench with preheater. Combines the PHNE preheater, PHNS board support and RHN hand rest for stable work on populated PCBs.

JBC RBS – rework bench with preheater. Combines the PHSE preheater, PHSS board support and RHS hand rest for stable work on populated PCBs.

JBC RBSM – rework bench with rotative support. Combines the PHSE preheater, PSS board support and RHS hand rest for stable work on populated PCBs.

JBC RHB – right-hand rest with base. The articulated arm supports the right hand during fine rework above the PHBEK set.

JBC RHBD – double hand rest with base. Two articulated arms support both hands during rework above the PHBEK set.

JBC RHN – right-hand rest with base. The articulated arm supports the right hand during fine rework above the PHNEK set.

JBC RHND – double hand rest with base. Two articulated arms support both hands during rework above the PHNEK set.

JBC RHS – right-hand rest with base. The articulated arm supports the right hand during fine rework above the PHSEK set.

JBC RHSD – double hand rest with base. Two articulated arms support both hands during rework above the PHSEK set.

JBC RHT – table-mounted right-hand rest. The articulated rest mounts to the bench and supports the hand close to the soldering area without a large base plate.

JBC RHTD – double articulated hand rest. Supports both hands during soldering and component placement. Articulated arms adjust to the work area.

JBC RHTL – articulated left hand rest. The left hand support helps maintain a steady position for precision work. A mounting flange secures it to the workbench.

JBC RMSD – rework system with DT530. Combines T245 soldering, solder extraction with DT530, and hot-air rework with JTT.

JBC RMSE – rework system with DR560. Combines T245 soldering, solder extraction with DR560, and hot-air rework with JTT.

JBC RWB – adjustable rework arm with base. Holds the hot-air tool over the board and allows adjustment of its working position on a separate base.

JBC RWS – adjustable rework arm with base. Holds the hot-air tool over the board and allows adjustment of its working position on a separate base.

JBC RWT – table-mounted rework arm. Holds the hot-air tool over the board and allows adjustment of its working position with a table mounting.

JBC RWXLT – table-mounted rework arm. Holds the hot-air tool over the board and allows adjustment of its working position with a table mounting.

JBC SRS – hot-air SMD rework system. Combines JTT top heating, the RWS positioning arm and PHSEK bottom preheating with a board support.