ESD Measuring Instruments & Testers
Regular measurement is the only way to verify that your EPA zone actually works. Even the best equipment cannot guarantee protection without regular verification — the IEC 61340-5-1 standard explicitly requires it, and the results serve as proof of compliance for customers and certification bodies alike.
What to measure and when: Use a combo tester every day when operators clock in — in five seconds you verify the wrist strap and mat at once. You need a surface resistance meter when accepting new equipment, after floor renovation or when the ESD properties of a material might have deteriorated. Use a field meter when installing an ioniser or troubleshooting mysterious component failures. A complete audit kit serves the periodic audit of the entire EPA zone — typically once a year or after any major change to the workplace.
We offer combo testers, precision resistance meters, field meters and complete audit kits. We also perform certified audits on site with a protocol compliant with IEC 61340-5-1.
Contact us to select a suitable instrument or to book an audit.
Product sorting
List of products
Mounting bracket for fixed placement of the tester on a wall or post at the EPA area entrance. Compatible with PGT 100 and PGT 120.
Wall mount for fixed installation of the DT3 data terminal (access control system linked to the PGT 120.COM tester).
Practical transport case for safe storage and transport of Warmbier measuring electrodes.
Holder for mechanical attachment of the PGT 120 tester to a prepared surface (table, stand, wall).
Metal plate suitable as a base for PGT 100 / PGT 120 testers and other ESD measuring devices.
Replacement measurement lead set for METRISO 2000, 3000 and B530. Contains com/shield lead and positive lead.
Extended calibration unit with 12 DIP switches for more detailed verification of the PGT 120 tester across a wider value range.
Surface resistance meter, range 10³ – 10¹² Ω, measurement voltage 100 V in unloaded state. Practical aid for quick inspection.
Calibration and verification unit for regular functional checks of the PGT 120 tester. 8 DIP switches for setting reference resistance values.
Warmbier measuring electrode for connection to METRISO 2000 / 3000 / B530 resistance meters. Original accessory for ESD audits.
Pair of clip electrodes for attaching to ESD garments. For testing resistance between two points on the garment.
Simple verification decade Veribox for quick verification of resistance meters. Practical companion to the measuring case.
Cable reel with 50 m length for METRISO meters. Enables measurement of distant points – ideal for audits of large EPA areas.
Warmbier measuring electrode for connection to METRISO 2000 / 3000 / B530 resistance meters. Original accessory for ESD audits.
Standalone floor stand for mounting the PGT 120 tester. Sturdy construction, ideal at the EPA entrance.
Measuring mat designed to complement the PGT 120 personal tester. Serves as a footrest during footwear grounding tests.
Set of two model 870 measuring electrodes for surface resistance measurement using the two-electrode method (EN 61340-2-3).
Warmbier measuring electrode for connection to METRISO 2000 / 3000 / B530 resistance meters. Original accessory for ESD audits.
Warmbier measuring electrode for connection to METRISO 2000 / 3000 / B530 resistance meters. Original accessory for ESD audits.
ESD tester for measuring wrist straps and footwear with conductive plate. Test result is visually indicated.
Simple decade for quick verification of accuracy of METRISO and SRM resistance meters. For regular calibration checks.
Analog compact surface resistance meter SRM 110. Measurement range 10³ – 10¹² Ω, measurement voltage 100 V. For ESD audits and inspections of floors and mats.
Universal compact wrist strap tester for mobile use. Version with 4.5 mm and 10 mm connectors.
Universal compact wrist strap tester for mobile use. Version with 7 mm and 10 mm connectors.
Converter for converting analogue signals from Warmbier meters to digital USB format for PC.
Analogue surface resistance meter SRM 110, range 10³ – 10¹² Ω, measurement voltage 100 V in unloaded state.
Single two-sided electrode model 890 (replacement/addition to set 7220.890.SET).
1D and 2D barcode scanner for METRISO 3000. Enables quick identification of measurement points via pre-printed labels.
Complete stand for standalone installation of the PGT 120 tester – all-in-one solution from Warmbier.
Circular electrode model 880 for surface resistance measurement at a single point with grounding ring. For precise measurements.
Combination of measuring mat SM and stand solution – complete workstation for footwear grounding tests with yellow safety edge.
Two-sided electrode set model 890 for measuring resistance between two surfaces of a material. For testing ESD garments, gloves, etc.
Compact personal tester for fast checking of grounding systems – wrist straps and footwear. Fixed measuring electrode, LED result display, easy operation.
Hand-held electrostatic field (charge) meter EFM 022 for mobile non-contact measurement of voltage on material surfaces.
Extended mounting accessory for installing PGT 120 and DT3 data terminal on a single holder.
Digital surface resistance meter SRM 200 with LCD display. Measurement range 10³ – 10¹² Ω, auto-range and precise digital readout.
Mini probe set with two-point electrode for precise local resistance measurements on small areas. For audits of small items and components.
More sophisticated WST100 model designed for compliance checking between wrist strap and footwear. For higher EPA control level.
ESD entry gate SW027 including post. Practical solution for controlled entry to EPA areas with lower requirements than a turnstile.
Pressure electrode set model 830 for resistance measurements requiring controlled contact pressure. For audits of ESD work surfaces and floors.
PG test station for PGT 120 / PGT 120.COM. Dimensions 1700 × 590 mm. Complete EPA entry point with space for testing and logging.
PGT 120 version with RS232 interface for connection to PC or access control system. Test result logging, automatic turnstile opening, higher level of EPA control.
Portable digital electrostatic field meter. Non-contact voltage measurement, robust construction, wide range.
Standalone basic meter B530 for surface and volume resistance. Affordable alternative to METRISO 3000.
Verification set SRM 200 VK containing the SRM 200 meter and verification decade for regular calibration checks.
Hand-held tester for verifying ESD ionizer function. Measures discharge time and offset voltage.
Basic set of the EFM51 instrument with capacitor for Walking Test. Cost-effective variant without CPS plate.
Practical monitoring device for continuous supervision of ESD ionizer function at the workplace.
ESD Combo tester X3 for measuring wrist straps and footwear. Test result is indicated visually and acoustically.
Basic measuring set B530 with electrode model 870 for mobile ESD audits. Cost-effective solution for regular inspections.
Recommended products: Surface Resistance Meter Kit · Combo Tester X3 · ESD Tester PGT120 + turnstile
You might also like: Workstation grounding · ESD audits & training · ESD tools
