ESD Flooring
ESD flooring forms the foundation of your entire antistatic protection — every movement of an operator or handling cart generates a charge that needs a safe path to ground. A poorly chosen or ungrounded floor causes problems that even an otherwise correctly designed EPA system cannot detect.
Product sorting
List of products
Turnkey installation of antistatic (ESD) floors — PVC rolls and tiles, interlocking puzzle systems and conductive coatings. Complete project: substrate preparation, copper grid,...
32-917-2436 – sticky mat 600 × 900 mm, 30 layers. Blue mat captures contamination from soles and wheels before entry to a clean area. Peel off the dirty layer to expose a clean...
32-917-2645 – sticky mat 660 × 1140 mm, 30 layers. Blue mat captures contamination from soles and wheels before entry to a clean area. Peel off the dirty layer to expose a clean...
Conductive ESD anti-fatigue mat 660 × 960 mm, black, equipped with 1 × 10 mm grounding stud (male). ESD logo, bevelled edges for safety.
Conductive ESD anti-fatigue mat 960 × 1260 mm, black, equipped with 1 × 10 mm grounding stud (male). ESD logo, bevelled edges for safety.
32-917-7005 – ESD anti-fatigue mat 610 × 910 mm. Dissipative mat for workstations where operators stand for extended periods. The profiled surface supports the feet.
32-917-7100 – ESD anti-fatigue mat 910 × 1520 mm. Dissipative mat for workstations where operators stand for extended periods. The profiled surface supports the feet.
Black conductive anti-fatigue mat 0.6 × 0.9 m, 12.7 mm thick. Surface resistance 10⁵–10⁷ Ω. For standing workstations in EPA areas.
Anti-fatigue ESD mat in roll 900 mm × 18 m, 9.5 mm thick. Rg 1·10⁸ – 1·10¹¹ Ω, complies with ANSI/ESD 7.1 and ESD TR53.
Conductive ESD anti-fatigue mat 610 × 1840 mm, black with yellow safety edges, equipped with 2 × 10 mm grounding stud (male). ESD logo, bevelled edges for safety.
Conductive anti-fatigue mat ESD-dry ergolastec Type A made of new rubber compound (SBR rubber). Robust solution for EPA workstations in wet environments.
Very low-emission conductive fibre-reinforced dispersion adhesive K192. For installation of conductive PVC coverings, tiles and homogeneous floorings.
Yellow corner piece for the interlocking ESD puzzle floor. Completes the corners of the EPA area, combines with the F2021/F2023 edge ramp.
Dissipative ESD anti-fatigue mat NoTrax Cushion-Stat 825 in Black/Yellow, size 914 × 1,524 mm (3 × 5 ft), 9.5 mm thick, Rg/Rp 10⁶–10⁹ Ω, durable Dyna-Shield® surface.
Dissipative ESD anti-fatigue mat NoTrax Cushion-Stat 825 in Black/Yellow, roll 914 × 18,288 mm (3 × 60 ft), 9.5 mm thick, Rg/Rp 10⁶–10⁹ Ω.
Dissipative anti-fatigue mat Typ 1 made of integrated PUR foam for standing workstations in EPA areas. Fire class B1 (custom dimensions).
Dissipative anti-fatigue mat Typ 1 made of integrated PUR foam for standing workstations in EPA areas. Fire class B1 660 × 960 mm.
Dissipative anti-fatigue mat Typ 1F made of integrated PUR foam for standing workstations in EPA areas. Fire class B1 (custom dimensions).
Dissipative anti-fatigue mat Typ 1F made of integrated PUR foam for standing workstations in EPA areas. Fire class B1 660 × 960 mm.
Dissipative anti-fatigue mat Typ 2 made of integrated PUR foam for standing workstations in EPA areas. Fire class B1 (custom dimensions).
Dissipative anti-fatigue mat Typ 2 made of integrated PUR foam for standing workstations in EPA areas. Fire class B1 660 × 960 mm.
Black ESD anti-fatigue mat Type 200 with bevelled edges and embossed surface. Grip, slip-resistant, including stud connector.
Yellow-black ESD anti-fatigue mat Type 215 with bevelled edges and embossed surface. Including 2 × stud connectors for reliable grounding.
Black ESD bubble anti-fatigue mat 600 × 900 mm. Bevelled edges for safety. Recommended with grounding cord.
Black conductive primer WL110 for conductive epoxy coatings. Ensures stable conductivity of the final ESD layer.
Conductive ESD acrylic paint Blue RAL 5002 on a water base, 5 L. Coverage 45–50 m²/coat. Surface resistance 10⁵–10⁸ Ω, can be applied during operation.
Conductive ESD acrylic paint Green RAL 6002 on a water base, 5 L. Coverage 45–50 m²/coat. Surface resistance 10⁵–10⁸ Ω, can be applied during operation.
Conductive ESD acrylic paint Grey RAL 7004 on a water base, 5 L. Coverage 45–50 m²/coat. Surface resistance 10⁵–10⁸ Ω, can be applied during operation.
Conductive ESD acrylic paint Red RAL 3011 on a water base, 5 L. Coverage 45–50 m²/coat. Surface resistance 10⁵–10⁸ Ω, can be applied during operation.
Conductive clear lacquer 10 L for the final treatment of ESD floors. Generates < 50 V when walked on. Suitable for PVC, acrylic, concrete, rubber and asphalt.
Conductive primer for ESD acrylic coating VA40, 5 L pack. Coverage 45–50 m²/coat. Application by brush or roller.
Antistatic conductive two-component epoxy coating WL113. Suitable for floors and walls, easy application for permanent ESD protection.
Modular ESD rubber tile, 45 × 45 cm, for heavy-duty use. 19 mm thick with universal interlocking connectors and a slip-resistant diamond-plate surface.
Dissipative and slip-resistant ESD mat for standing workstations, ergonomic elastic foam. Standard size.
Dissipative and slip-resistant ESD mat for standing workstations, ergonomic elastic foam. Supplied as cut format – cut to size on request.
Dissipative and slip-resistant ESD mat for standing workstations, ergonomic elastic foam. Supplied in roll – any length can be cut.
Grounding Kit for Antistatic Coatings. Complete grounding kit for connecting antistatic coatings and floors to ground.
Conductive clear ESD lacquer for floors. Turns almost any surface into an ESD surface. For PVC, acrylic, concrete, rubber, asphalt. Complies with EN 61340-5-1. Coverage approx....
Polymer dispersion for floor surface treatments, dissipative. Conservation film for electrically conductive Sto floor coatings. Transparent, medium gloss. Pack 5 L canister....
Two-component PUR sealing coating, water-emulsifiable, matt, electrically conductive. Complies with IEC 61340-5-1. Pack 7.5 kg bucket (A+B). Coverage approx. 50–75 m².
ESD needle-punched carpet Strong Compact 926 in rolls, glued. Load class 23 / 33. For offices, reception areas and less loaded EPA areas.
When you need ESD flooring: you are setting up a new workplace for PCB assembly or repair, renovating an existing facility that does not meet IEC 61340-5-1, building a service centre for electronics, equipping a cleanroom or storage area for MSL components, or you need a fast temporary solution when relocating production.
We offer PVC rolls and tiles for permanent installation, interlocking puzzle flooring for rapid coverage without adhesives, carpets for office areas, and paints and coatings for renovating existing concrete or floating floors. Everything complies with IEC 61340-5-1.
We help you choose according to electrical resistance (conductive vs. dissipative), load capacity and installation method — contact us or order a free sample.
Recommended products: Antistatic conductive primer for epoxy coatings · Floor resistance meter · Grounding accessories for floors
You might also like: Workplace grounding · Measuring instruments · Antistatic materials
