Vieweg All-Metal Dispensing Needle, 3 cannulas, 0.40 mm, G22, L20 mm

Product detailed description

Vieweg All-Metal Dispensing Needle, 3 cannulas, 0.40 mm, G22, L20 mm

All-metal Vieweg dispensing needle with 3 stainless steel 1.4301 cannulas in a nickel-plated brass hub, Luer-Lock thread. The multiple cannulas apply 3 parallel dots or beads at once, speeding up dispensing on repeated positions. With no plastic parts it withstands solvents and temperature and is reusable.

The 0.40 mm (Gauge 22) inner diameter is a versatile choice for precise dots and thin beads – flux, medium-thin adhesives and fine-pitch solder paste on smaller pads. The longer 20 mm cannula reaches between taller components, into grooves and around edges.

For a finer deposit choose G24 (0.28 mm) from the same range; for thicker media or higher flow choose G21 (0.50 mm). The same bore is also available with 2 and 4 cannulas. The Luer-Lock thread fits standard dispensing cartridges and syringes from 3 to 55 ml as well as dispensing valves with this connection.

Price per piece.

Key specifications

• Manufacturer: Vieweg
• Manufacturer part no.: 501513 (561125-3)
• Type: All-metal dispensing needle
• Inner diameter: 0.40 mm (Gauge 22)
• Outer diameter: 0.70 mm
• Needle length: 20 mm
• Connector: Luer-Lock
• Material: nickel-plated brass (hub), stainless steel 1.4301 (cannula)

Use and selection

3 cannulas allow material to be dispensed at several points simultaneously. Choose the bore and length to suit the material, required deposit and access to the component.