Dispensing needle, 45° bent, Ø 0.21 mm, L 12.7 mm, Gauge 27, transparent
Code: WT-814584
Related products
Product detailed description
Dispensing needle, 45° bent, Ø 0.21 mm, L 12.7 mm, Gauge 27, transparent
Metal dispensing needle with a cannula bent at 45° for manual and digital dispensing systems. The bend makes hard-to-reach spots easier to access and keeps the tip in view. Suitable for EPA workplaces according to IEC 61340-5-1.
A 0.21 mm (Gauge 27) bore is the right choice where a small, well-defined dot is needed: flux, conformal coatings, thin adhesives and placement of small SMD parts. The standard 12.7 mm (1/2") length is a good compromise between tip stability and a clear view of the dispensing point.
For a finer deposit choose G30 (0.16 mm, lavender) from the same range; for thicker media or higher flow choose G25 (0.26 mm, red).
Sold in packs of 50 – the price is for the whole pack.
Key specifications
- Type: Metal dispensing needle, bent 45°
- Inner diameter: 0.21 mm (Gauge 27)
- Needle length: 12.7 mm (1/2")
Use and selection
The angled cannula provides access from the side. Choose the bore and length to suit the material, required deposit and access to the component.
Additional parameters
| Category: | Dispensing needles |
|---|---|
| Color: | Transparent |
| Weight [g]: | 100 |
| Design: | 45° bent |
| Diameter [mm]: | 0.21, 0.8 |
| Packaging type: | Dispensing needle |
| Package size: | 50 pcs |
| Inner diameter: | 0,21 mm |
| Délka jehly [mm]: | 12.7 |
| Gauge size: | 27 |
| Tvar jehly: | Bent 45° |