Soldering equipment — soldering stations and tips JBC, Weller, QUICK, Page 11

JBC CLMUP – automatic soldering tip cleaner – fiber brushes. A sensor starts rotary cleaning when the tip approaches. Continuous operation is available for repeated work.

JBC CP – compact precision rework station. AM120 thermal tweezers grip and simultaneously heat both ends of small SMD components.

JBC CS – precision suction desoldering station. The DS360 micro iron extracts solder from small through-hole leads and SMD pads. The electric MS module supplies vacuum.

JBC CSR245 – robot cartridge exchanger R245. The exchanger lets a robot deposit a cartridge and pick up another working geometry within an automatic cycle.

JBC CSR470 – robot cartridge exchanger R470. The exchanger lets a robot deposit a cartridge and pick up another working geometry within an automatic cycle.

JBC CTS – stabilizing solder pot stand. Stabilizes the solder pot cartridge and shields the work area with a removable tray and protective screen.

JBC CU110 – cups for extractors and tripods. The cup applies vacuum to the component package to lift it after its solder joints melt.

JBC D530001: through-hole desoldering tip Ø 0.6 mm. Extracts molten solder around through-hole leads. For JBC tools DT530.

JBC D530002: through-hole desoldering tip Ø 0.8 mm. Extracts molten solder around through-hole leads. For JBC tools DT530.

JBC D530003: through-hole desoldering tip Ø 1 mm. Extracts molten solder around through-hole leads. For JBC tools DT530.

JBC D530004: through-hole desoldering tip Ø 1.3 mm. Extracts molten solder around through-hole leads. For JBC tools DT530.

JBC D530005: through-hole desoldering tip Ø 1.5 mm. Extracts molten solder around through-hole leads. For JBC tools DT530.

JBC D530006: through-hole desoldering tip Ø 1.9 mm. Extracts molten solder around through-hole leads. For JBC tools DT530.

JBC D530007: through-hole desoldering tip Ø 2.4 mm. Extracts molten solder around through-hole leads. For JBC tools DT530.

JBC D530009: through-hole desoldering tip Ø 1.3 mm. Extracts molten solder around through-hole leads. For JBC tools DT530.

JBC D530011: pad-cleaning tip Ø 0.6 mm. Removes residual solder when cleaning solder pads. For JBC tools DT530.

JBC D530012: pad-cleaning tip Ø 0.8 mm. Removes residual solder when cleaning solder pads. For JBC tools DT530.

JBC D530013: pad-cleaning tip Ø 1 mm. Removes residual solder when cleaning solder pads. For JBC tools DT530.

JBC D530014: through-hole desoldering tip Ø 0.8 mm. Extracts molten solder around through-hole leads. For JBC tools DT530.

JBC D530015: through-hole desoldering tip Ø 3 mm. Extracts molten solder around through-hole leads. For JBC tools DT530.

JBC D530017: through-hole desoldering tip Ø 1.1 mm. Extracts molten solder around through-hole leads. For JBC tools DT530.

JBC D530018: through-hole desoldering tip Ø 2.2 mm. Extracts molten solder around through-hole leads. For JBC tools DT530.

JBC DC115 / DC210 – soldering cartridge dispenser. Organizes spare cartridges on the workbench for easier selection of the required geometry.

JBC DDCT – solder pot station 18 × 15 mm. The T245-mounted pot tins wire ends and immerses multiple contacts in molten solder.

JBC DDE – 2-tool control unit. Independently controls up to 2 tools, allowing soldering handles and desoldering equipment to share one workstation.

JBC DDPE – two-tool precision rework station. The precision T210 soldering handle is paired with AM120 adjustable micro tweezers for small SMD work.

JBC DDSD – rework station with DT530. The T245 soldering handle is paired with DT530 for solder extraction from through-hole leads and pad cleaning.

JBC DDSE – rework station with DR560. The T245 soldering handle is paired with DR560 for solder extraction from through-hole leads and pad cleaning.

JBC DI – 1-tool control unit. The single-tool unit forms the basis of a modular soldering or desoldering workstation with matching accessories.

JBC DME – 4-tool control unit. Independently controls up to 4 tools, allowing soldering handles and desoldering equipment to share one workstation.

JBC DMPSD – rework station with DT530. Combines precision and general soldering, SMD tweezers and solder extraction with the DT530 tool.

JBC DMPSE – rework station with DR560. Combines precision and general soldering, SMD tweezers and solder extraction with the DR560 tool.

JBC DMSD – rework station with DT530. The T245 soldering handle is paired with DT530 for solder extraction from through-hole leads and pad cleaning.

JBC DMSE – rework station with DR560. The T245 soldering handle is paired with DR560 for solder extraction from through-hole leads and pad cleaning.

JBC DNS – stand for nitrogen soldering handles. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC DPM – manual solder paste dispenser. The mechanical dispenser applies small amounts of solder paste, flux or adhesive from a syringe barrel.

JBC DR560 – suction desoldering iron. Heats and extracts solder from through-hole leads. The glass collector shows how much solder has accumulated.

JBC DRS – stand for DR560. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC DS360 – micro desoldering iron. The slim tool provides precise solder extraction at small through-hole components and solder pads.

JBC DSS – stand for DS360. The stand holds the tool between operations and connects it to the station’s temperature-reduction control.

JBC DT530 – angled desoldering iron. The angled handle improves access for pad cleaning and through-hole desoldering.

JBC DTS – stand for DT530. The holder fits the angled DT530 desoldering iron and provides a cleaner and storage for four tips.

JBC ESHT – magazine with extractors and protectors. Organizes hot-air desoldering accessories. Extractors lift the package after solder melts, while protectors limit heating...

JBC FAE010 – flexible extraction hose Ø 50 mm. Connects the extraction unit to a workbench arm or collector flange for soldering fume removal.

JBC FAE022 – through-bench extraction arm. The flexible arm brings the extraction nozzle close to the joint and adjusts to the current soldering position.

JBC FAE030 – collector flange for extraction ducts. Combines up to four ducts from stands or compact stations into one extraction hose.

JBC FAE040 – extraction collector flange with clamp. Combines up to four ducts from stands or compact stations into one extraction hose.

JBC FAE050 – extraction duct for modular stands. Carries fumes from a tip parked in a modular stand to the extraction collector flange.

JBC FAE060 – extraction duct for compact stations. Extracts fumes from a tool parked in a compact station and connects to an FAE collector flange.

JBC FAE072 – extraction arm with clamp. The flexible arm brings the extraction nozzle close to the joint and adjusts to the current soldering position.