e

JBC Soldering Tips

Original JBC soldering tips for JBC stations and handpieces. Choose by series (C245, C210, C115, C105, C470 and more) or by compatible handpiece using the filter.

Product sorting

205 items total

List of products

JBC C245001 – pájecí hrot, kuželový Ø 0,6 mm
€29,23 / pcs

The 0.6 mm conical tip has a straight working geometry for localized contact with the joint. For JBC T245 handles.

C245001
JBC C245009 – pájecí hrot pro tažené pájení QFP 4,5 × 1,8 mm
€40,31 / pcs

The special working face is designed for drag soldering QFP integrated circuits. For JBC T245 handles.

C245009
JBC C245010 – pájecí hrot pro tažené pájení PLCC
€40,31 / pcs

The PLCC Drag shape is intended for drag soldering integrated circuits with matching lead geometry. For JBC T245 handles.

C245010
JBC C245016 – pájecí hrot, vidlicový Chip 1,9 mm
€40,31 / pcs

The open forked Chip end is designed for desoldering chip components. Its designated size is 1.9 mm. For JBC T245 handles.

C245016
JBC C245017 – pájecí hrot, vidlicový Chip
€40,31 / pcs

This forked Chip tip is intended for desoldering chip components. Match the working-end shape to the component terminals. For JBC T245 handles.

C245017
JBC C245018 – pájecí hrot, vidlicový Chip 3,4 mm
€40,31 / pcs

The open Chip end is intended for desoldering chip components. Match its 3.4 mm size to the specific component package. For JBC T245 handles.

C245018
JBC C245019 – pájecí hrot, vidlicový Chip 4,5 mm
€40,31 / pcs

This model provides an open 4.5 mm Chip end for desoldering chip components. For JBC T245 handles.

C245019
JBC C245029 – pájecí hrot, zahnutý kuželový Ø 0,4 mm
€29,23 / pcs

The fine 0.4 mm conical end is bent away from the tool axis, providing an angled contact approach. For JBC T245 handles.

C245029
JBC C245030 – pájecí hrot, kuželový Ø 0,3 mm
€29,23 / pcs

The 0.3 mm diameter provides a fine conical end for positioning the tip on a small solder pad. For JBC T245 handles.

C245030
JBC C245032 – pájecí hrot, kuželový Ø 0,4 mm
€29,23 / pcs

The straight conical geometry with a 0.4 mm diameter suits joints that require a narrow, unbent end. For JBC T245 handles.

C245032
JBC C245034 – pájecí hrot, zahnutý kuželový Ø 0,4 mm
€29,23 / pcs

The short bent end approaches the joint at an angle while retaining a fine 0.4 mm tip diameter. For JBC T245 handles.

C245034
JBC C245036 – pájecí hrot, kuželový Ø 0,5 mm
€29,23 / pcs

The straight fine tip has a 0.5 mm end for targeted contact. Check the working profile against the clearance around the joint. For JBC T245 handles.

C245036
JBC C245041 – pájecí hrot, kuželový Ø 1 mm
€29,23 / pcs

This special conical tip has an extended tinned surface, distinguishing it from a standard tip with the same 1 mm diameter. For JBC T245 handles.

C245041
JBC C245052 – nýtovací hrot pro plasty Ø 4,9 mm
€40,31 / pcs

JBC C245052: heat-staking tip for plastics Ø 4.9 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.

C245052
JBC C245053 – nýtovací hrot pro plasty Ø 3,8 mm
€40,31 / pcs

JBC C245053: heat-staking tip for plastics Ø 3.8 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.

C245053
JBC C245054 – nýtovací hrot pro plasty Ø 6,5 mm
€40,31 / pcs

JBC C245054: heat-staking tip for plastics Ø 6.5 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.

C245054
JBC C245056 – pájecí hrot, zkosený Ø 3,5 mm HT
€29,23 / pcs

The 3.5 mm HT bevel combines a wider contact end with geometry designed for efficient heat transfer. For JBC T245 handles.

C245056
JBC C245061 – pájecí hrot, dláto 3 × 1 mm
€29,23 / pcs

This straight chisel geometry measures 3 × 1 mm. C245761 is the bent alternative to this model. For JBC T245 handles.

C245061
JBC C245064 – pájecí hrot, zkosený Ø 1,3 mm
€29,23 / pcs

The reduced tinned area is intended especially for touching up solder joints. For JBC T245 handles.

C245064
JBC C245067 – pájecí hrot, lžička Ø 2,3 mm
€40,31 / pcs

The 2.3 mm spoon face has a visible recess for working with solder. For JBC T245 handles.

C245067
JBC C245069 – pájecí hrot, dláto 5 × 1,7 mm HT
€29,23 / pcs

This special chisel has extra iron plating. The manufacturer identifies it as particularly suitable for robotic applications. For JBC T245 handles.

C245069
JBC C245070E – pájecí hrot ve tvaru dláta 5 × 1,7 mm E
€32,25 / pcs

JBC C245070E: chisel tip 5 × 1.7 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.

C245070E
JBC C245071 – pájecí hrot pro konektory Faston
€54,42 / pcs

The bridge-shaped end heats two ends of a connector simultaneously during rework. This model is intended for Faston terminals. For JBC T245 handles.

C245071
JBC C245102 – pájecí hrot, zkosený Ø 2 mm
€29,23 / pcs

The 2 mm bevel has a reduced tinned area for targeted touch-up work on individual joints. For JBC T245 handles.

C245102
JBC C245107 – pájecí hrot, kuželový Ø 3 mm HT
€29,23 / pcs

The 3 mm conical tip uses HT geometry for joints requiring efficient heat transfer. For JBC T245 handles.

C245107
JBC C245109 – hrot pro odstraňování povlaků 4,3 mm
€36,28 / pcs

JBC C245109: coating removal tip 4.3 mm. The tip removes coatings during electronics rework. It is not intended for soldering. For JBC tools T245.

C245109
JBC C245116 – pájecí hrot pro piny a konektory R 1 mm
€50,39 / pcs

JBC C245116: pin and connector tip R 1 mm. The special profile is designed for soldering connector contacts. For JBC tools T245.

C245116
JBC C245117 – pájecí hrot pro piny a konektory Ø 1,45 mm
€43,34 / pcs

JBC C245117: pin and connector tip Ø 1.45 mm. The special profile is designed for soldering connector contacts. For JBC tools T245.

C245117
JBC C245118 – pájecí hrot pro piny a konektory 0,4 mm
€43,34 / pcs

JBC C245118: pin and connector tip 0.4 mm. The special profile is designed for soldering connector contacts. For JBC tools T245.

C245118
JBC C245119 – děrovací hrot pro plasty s PTFE Ø 1 mm
€65,51 / pcs

JBC C245119: PTFE-coated hole-punch tip for plastics Ø 1 mm. The PTFE-coated tip forms holes in plastic by heat. Its working temperature must remain below 200 °C. For JBC tools...

C245119
JBC C245121 – řezací hrot pro plasty 13 mm
€55,43 / pcs

JBC C245121: cutting tip for plastics 13 mm. The heated blade is intended for cutting plastic materials. For JBC tools T245.

C245121
JBC C245122 – pájecí hrot pro piny a konektory R 2 mm
€43,34 / pcs

JBC C245122: pin and connector tip R 2 mm. The special profile is designed for soldering connector contacts. For JBC tools T245.

C245122
JBC C245123 – nýtovací hrot pro plasty 4 × 4 mm
€47,37 / pcs

JBC C245123: heat-staking tip for plastics 4 × 4 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.

C245123
JBC C245124 – nýtovací hrot pro plasty 4,25 × 2 mm
€43,34 / pcs

JBC C245124: heat-staking tip for plastics 4.25 × 2 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.

C245124
JBC C245126 – pájecí hrot, zahnutý kuželový Ø 0,4 mm
€29,23 / pcs

The bent working section has a distinctly offset fine end, combining a 0.4 mm diameter with access away from the tool axis. For JBC T245 handles.

C245126
JBC C245136 – odpájecí hrot pro mikrospínače
€56,44 / pcs

JBC C245136: micro stick switch desoldering tip. The shaped tip desolders micro stick switches, for example during mobile device repairs. For JBC tools T245.

C245136
JBC C245138 – řezací hrot pro plasty 12 mm
€54,42 / pcs

JBC C245138: cutting tip for plastics 12 mm. The heated blade is intended for cutting plastic materials. For JBC tools T245.

C245138
JBC C245143 – dvojitý nýtovací hrot pro plasty Ø 1,8 mm
€54,42 / pcs

JBC C245143: double heat-staking tip for plastics Ø 1.8 mm. The twin working ends heat-form two plastic rivets. For JBC tools T245.

C245143
JBC C245150 – pájecí hrot, vidlicový Chip 2,2 mm
€40,31 / pcs

This chip-desoldering tip has a special tinned length of 3.5 mm. Its designated Chip size is 2.2 mm. For JBC T245 handles.

C245150
JBC C245155E – boční pohled na kartuši
€32,25 / pcs

JBC C245155E: chisel tip 2.4 × 0.8 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.

C245155E
JBC C245156E – zkosený pájecí hrot Ø 2,4 mm E
€32,25 / pcs

JBC C245156E: bevel tip Ø 2.4 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T245.

C245156E
JBC C245157E – pájecí hrot ve tvaru nože 7,2 × 0,1 mm E
€39,31 / pcs

JBC C245157E: knife tip 7.2 × 0.1 mm. The knife profile combines a narrow edge with an elongated soldering face. For JBC tools T245.

C245157E
JBC C245158E – pájecí hrot ve tvaru dláta 1,2 × 0,4 mm E
€32,25 / pcs

JBC C245158E: chisel tip 1.2 × 0.4 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.

C245158E
JBC C245159E – pájecí hrot ve tvaru dláta 0,8 × 0,4 mm E
€32,25 / pcs

JBC C245159E: chisel tip 0.8 × 0.4 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.

C245159E
JBC C245160E – pájecí hrot ve tvaru dláta 1,6 × 0,5 mm E
€32,25 / pcs

JBC C245160E: chisel tip 1.6 × 0.5 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.

C245160E
JBC C245161E – pájecí hrot ve tvaru dláta 3,2 × 0,8 mm E
€32,25 / pcs

JBC C245161E: chisel tip 3.2 × 0.8 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.

C245161E
JBC C245163 – dutý nýtovací hrot Ø 2,5 mm
€43,34 / pcs

The hollow working end has a chrome finish for heat staking plastic rivets. For JBC T245 handles.

C245163
JBC C245166 – hrot pro plasty Inox Ø 1,7 mm
€40,31 / pcs

The Plastics Inox design is intended for plastic applications and has a cylindrical end measuring 1.7 mm in diameter. For JBC T245 handles.

C245166
JBC C245167 – hrot pro tepelné děrování plastů Ø 2,1 mm
€43,34 / pcs

JBC C245167: thermal hole-punch tip for plastics Ø 2.1 mm. The heated pointed end forms holes in plastic. For JBC tools T245.

C245167
JBC C245168 – hrot pro tepelné děrování plastů Ø 3,1 mm
€43,34 / pcs

JBC C245168: thermal hole-punch tip for plastics Ø 3.1 mm. The heated pointed end forms holes in plastic. For JBC tools T245.

C245168

Listing controls

205 items total
Top

The performance of a soldering station depends not only on the unit itself but also on the quality of the tip. Original JBC soldering tips are engineered for optimal heat transfer, high precision and long service life, even in intensive industrial use. Thanks to JBC's patented heating system, energy is transferred to the solder joint very quickly, which shortens soldering time, improves joint quality and minimises thermal stress on electronic components.

How to choose a JBC tip? First identify your handpiece – the tip series must match it (for example, C245 tips fit the T245 handpiece, C210 the T210, C115 the NT115 and C470 the T470). Then select the shape and size for the joint: conical and fine tips for SMT and micro soldering, chisels and blades for larger areas, and special tips for desoldering, connectors and plastics.

The range includes more than 500 tips and accessories, including desoldering tips and nozzles. The tips belong to soldering stations from JBC. Need help choosing? Contact us.