e

JBC Soldering Tips

Original JBC soldering tips for JBC stations and handpieces. Choose by series (C245, C210, C115, C105, C470 and more) or by compatible handpiece using the filter.

Product sorting

98 items total

List of products

JBC C245052 – nýtovací hrot pro plasty Ø 4,9 mm
€40,31 / pcs

JBC C245052: heat-staking tip for plastics Ø 4.9 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.

C245052
JBC C245053 – nýtovací hrot pro plasty Ø 3,8 mm
€40,31 / pcs

JBC C245053: heat-staking tip for plastics Ø 3.8 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.

C245053
JBC C245054 – nýtovací hrot pro plasty Ø 6,5 mm
€40,31 / pcs

JBC C245054: heat-staking tip for plastics Ø 6.5 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.

C245054
JBC C245070E – pájecí hrot ve tvaru dláta 5 × 1,7 mm E
€32,25 / pcs

JBC C245070E: chisel tip 5 × 1.7 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.

C245070E
JBC C245109 – hrot pro odstraňování povlaků 4,3 mm
€36,28 / pcs

JBC C245109: coating removal tip 4.3 mm. The tip removes coatings during electronics rework. It is not intended for soldering. For JBC tools T245.

C245109
JBC C245116 – pájecí hrot pro piny a konektory R 1 mm
€50,39 / pcs

JBC C245116: pin and connector tip R 1 mm. The special profile is designed for soldering connector contacts. For JBC tools T245.

C245116
JBC C245117 – pájecí hrot pro piny a konektory Ø 1,45 mm
€43,34 / pcs

JBC C245117: pin and connector tip Ø 1.45 mm. The special profile is designed for soldering connector contacts. For JBC tools T245.

C245117
JBC C245118 – pájecí hrot pro piny a konektory 0,4 mm
€43,34 / pcs

JBC C245118: pin and connector tip 0.4 mm. The special profile is designed for soldering connector contacts. For JBC tools T245.

C245118
JBC C245119 – děrovací hrot pro plasty s PTFE Ø 1 mm
€65,51 / pcs

JBC C245119: PTFE-coated hole-punch tip for plastics Ø 1 mm. The PTFE-coated tip forms holes in plastic by heat. Its working temperature must remain below 200 °C. For JBC tools...

C245119
JBC C245121 – řezací hrot pro plasty 13 mm
€55,43 / pcs

JBC C245121: cutting tip for plastics 13 mm. The heated blade is intended for cutting plastic materials. For JBC tools T245.

C245121
JBC C245122 – pájecí hrot pro piny a konektory R 2 mm
€43,34 / pcs

JBC C245122: pin and connector tip R 2 mm. The special profile is designed for soldering connector contacts. For JBC tools T245.

C245122
JBC C245123 – nýtovací hrot pro plasty 4 × 4 mm
€47,37 / pcs

JBC C245123: heat-staking tip for plastics 4 × 4 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.

C245123
JBC C245124 – nýtovací hrot pro plasty 4,25 × 2 mm
€43,34 / pcs

JBC C245124: heat-staking tip for plastics 4.25 × 2 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.

C245124
JBC C245136 – odpájecí hrot pro mikrospínače
€56,44 / pcs

JBC C245136: micro stick switch desoldering tip. The shaped tip desolders micro stick switches, for example during mobile device repairs. For JBC tools T245.

C245136
JBC C245138 – řezací hrot pro plasty 12 mm
€54,42 / pcs

JBC C245138: cutting tip for plastics 12 mm. The heated blade is intended for cutting plastic materials. For JBC tools T245.

C245138
JBC C245143 – dvojitý nýtovací hrot pro plasty Ø 1,8 mm
€54,42 / pcs

JBC C245143: double heat-staking tip for plastics Ø 1.8 mm. The twin working ends heat-form two plastic rivets. For JBC tools T245.

C245143
JBC C245155E – boční pohled na kartuši
€32,25 / pcs

JBC C245155E: chisel tip 2.4 × 0.8 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.

C245155E
JBC C245156E – zkosený pájecí hrot Ø 2,4 mm E
€32,25 / pcs

JBC C245156E: bevel tip Ø 2.4 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T245.

C245156E
JBC C245157E – pájecí hrot ve tvaru nože 7,2 × 0,1 mm E
€39,31 / pcs

JBC C245157E: knife tip 7.2 × 0.1 mm. The knife profile combines a narrow edge with an elongated soldering face. For JBC tools T245.

C245157E
JBC C245158E – pájecí hrot ve tvaru dláta 1,2 × 0,4 mm E
€32,25 / pcs

JBC C245158E: chisel tip 1.2 × 0.4 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.

C245158E
JBC C245159E – pájecí hrot ve tvaru dláta 0,8 × 0,4 mm E
€32,25 / pcs

JBC C245159E: chisel tip 0.8 × 0.4 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.

C245159E
JBC C245160E – pájecí hrot ve tvaru dláta 1,6 × 0,5 mm E
€32,25 / pcs

JBC C245160E: chisel tip 1.6 × 0.5 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.

C245160E
JBC C245161E – pájecí hrot ve tvaru dláta 3,2 × 0,8 mm E
€32,25 / pcs

JBC C245161E: chisel tip 3.2 × 0.8 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.

C245161E
JBC C245167 – hrot pro tepelné děrování plastů Ø 2,1 mm
€43,34 / pcs

JBC C245167: thermal hole-punch tip for plastics Ø 2.1 mm. The heated pointed end forms holes in plastic. For JBC tools T245.

C245167
JBC C245168 – hrot pro tepelné děrování plastů Ø 3,1 mm
€43,34 / pcs

JBC C245168: thermal hole-punch tip for plastics Ø 3.1 mm. The heated pointed end forms holes in plastic. For JBC tools T245.

C245168
JBC C245172E – zkosený pájecí hrot Ø 1 mm E
€32,25 / pcs

JBC C245172E: bevel tip Ø 1 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T245.

C245172E
JBC C245175E – zkosený pájecí hrot Ø 1,2 mm E
€32,25 / pcs

JBC C245175E: bevel tip Ø 1.2 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T245.

C245175E
JBC C245176E – zkosený pájecí hrot Ø 1,5 mm E
€32,25 / pcs

JBC C245176E: bevel tip Ø 1.5 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T245.

C245176E
JBC C245215 – pájecí hrot pro pouzdra DIL 9,6 × 18 mm
€63,50 / pcs

JBC C245215: dual-in-line tip 9.6 × 18 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.

C245215
JBC C245220 – pájecí hrot pro pouzdra DIL 5,4 × 6 mm
€63,50 / pcs

JBC C245220: dual-in-line tip 5.4 × 6 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.

C245220
JBC C245221 – pájecí hrot pro pouzdra DIL 5,4 × 10 mm
€63,50 / pcs

JBC C245221: dual-in-line tip 5.4 × 10 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.

C245221
JBC C245222 – pájecí hrot pro pouzdra DIL 7,1 × 13 mm
€63,50 / pcs

JBC C245222: dual-in-line tip 7.1 × 13 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.

C245222
JBC C245223 – odpájecí hrot QFP 8,5 × 8,5 mm
€66,52 / pcs

JBC C245223: QFP desoldering tip 8.5 × 8.5 mm. The shaped end desolders QFP and PLCC packages by contact heating their leads. For JBC tools T245.

C245223
JBC C245224 – odpájecí hrot QFP 12 × 12 mm
€66,52 / pcs

JBC C245224: QFP desoldering tip 12 × 12 mm. The shaped end desolders QFP and PLCC packages by contact heating their leads. For JBC tools T245.

C245224
JBC C245226 – pájecí hrot pro pouzdra DIL 15,2 × 29 mm
€63,50 / pcs

JBC C245226: dual-in-line tip 15.2 × 29 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.

C245226
JBC C245227 – odpájecí hrot QFP 17,5 × 17,5 mm
€92,72 / pcs

JBC C245227: QFP desoldering tip 17.5 × 17.5 mm. The shaped end desolders QFP and PLCC packages by contact heating their leads. For JBC tools T245.

C245227
JBC C245228 – odpájecí hrot QFP 12,4 × 15 mm
€66,52 / pcs

JBC C245228: QFP desoldering tip 12.4 × 15 mm. The shaped end desolders QFP and PLCC packages by contact heating their leads. For JBC tools T245.

C245228
JBC C245234 – zahnutý kuželový pájecí hrot Ø 0,4 mm L
€36,28 / pcs

JBC C245234: bent conical tip Ø 0.4 mm. The bent end provides angled access to the joint. For JBC tools T245.

C245234
JBC C245250 – pájecí hrot pro pouzdra DIL 5,4 × 8 mm
€63,50 / pcs

JBC C245250: dual-in-line tip 5.4 × 8 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.

C245250
JBC C245261 – pájecí hrot ve tvaru dláta 3 × 1 mm L
€36,28 / pcs

JBC C245261: chisel tip 3 × 1 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.

C245261
JBC C245268 – hrot Dual In Line 5 × 1,5 mm
€66,52 / pcs

JBC C245268 – Dual In Line cartridge 5 × 1.5 mm. Special cartridge for fast soldering of male contacts, designated Dual In Line by the manufacturer.

C245268
JBC C245301 – zkosený pájecí hrot Ø 8,8 mm
€54,42 / pcs

JBC C245301: bevel tip Ø 8.8 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T245.

C245301
JBC C245303 – pájecí hrot pro pouzdra DIL 6,5 × 6 mm
€63,50 / pcs

JBC C245303: dual-in-line tip 6.5 × 6 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.

C245303
JBC C245304 – tunelový pájecí hrot pro DIL 9,6 × 15 mm
€63,50 / pcs

JBC C245304: tunnel tip for DIL 9.6 × 15 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.

C245304
JBC C245305 – pájecí hrot pro pouzdra DIL 9,6 × 12 mm
€63,50 / pcs

JBC C245305: dual-in-line tip 9.6 × 12 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.

C245305
JBC C245306 – pájecí hrot pro pouzdra DIL 9,6 × 10 mm
€63,50 / pcs

JBC C245306: dual-in-line tip 9.6 × 10 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.

C245306
JBC C245311 – nýtovací hrot pro plasty 20 × 6 mm
€58,46 / pcs

JBC C245311: heat-staking tip for plastics 20 × 6 mm. The special working end is intended for thermal processing of plastics. For JBC tools T245.

C245311
JBC C245312 – nýtovací hrot pro plasty Ø 3,2 mm
€43,34 / pcs

JBC C245312: heat-staking tip for plastics Ø 3.2 mm. The special working end is intended for thermal processing of plastics. For JBC tools T245.

C245312
JBC C245313 – nýtovací hrot pro plasty Ø 4,1 mm
€43,34 / pcs

JBC C245313: heat-staking tip for plastics Ø 4.1 mm. The special working end is intended for thermal processing of plastics. For JBC tools T245.

C245313
JBC C245315 – odpájecí hrot QFP 15 × 15 mm
€66,52 / pcs

JBC C245315: QFP desoldering tip 15 × 15 mm. The shaped end desolders QFP and PLCC packages by contact heating their leads. For JBC tools T245.

C245315

Listing controls

98 items total
Top

The performance of a soldering station depends not only on the unit itself but also on the quality of the tip. Original JBC soldering tips are engineered for optimal heat transfer, high precision and long service life, even in intensive industrial use. Thanks to JBC's patented heating system, energy is transferred to the solder joint very quickly, which shortens soldering time, improves joint quality and minimises thermal stress on electronic components.

How to choose a JBC tip? First identify your handpiece – the tip series must match it (for example, C245 tips fit the T245 handpiece, C210 the T210, C115 the NT115 and C470 the T470). Then select the shape and size for the joint: conical and fine tips for SMT and micro soldering, chisels and blades for larger areas, and special tips for desoldering, connectors and plastics.

The range includes more than 500 tips and accessories, including desoldering tips and nozzles. The tips belong to soldering stations from JBC. Need help choosing? Contact us.