Product sorting
List of products
JBC C210010: bent conical tip Ø 0.3 mm. The bent end provides angled access to the joint. For JBC tools T210, B.100, B.500.
JBC C210012: round connector tip Ø 1 mm. The rounded recess contacts cylindrical terminals when soldering cables and connectors. For JBC tools T210, B.100, B.500.
JBC C210013: conical tip Ø 0.5 mm. The conical end provides point contact with an individual solder joint. For JBC tools T210, B.100, B.500.
JBC C210014: bent conical tip Ø 0.5 mm. The bent end provides angled access to the joint. For JBC tools T210, B.100, B.500.
JBC C210015: pin and connector tip Ø 0.8 mm. The special profile is designed for soldering connector contacts. For JBC tools T210, B.100, B.500.
JBC C210016: conical tip Ø 0.3 mm. The conical end provides point contact with an individual solder joint. For JBC tools T210, B.100, B.500.
JBC C210017: pin and connector tip Ø 0.7 mm. The special profile is designed for soldering connector contacts. For JBC tools T210, B.100, B.500.
JBC C210018: knife tip 3.4 × 0.3 mm. The knife profile combines a narrow edge with an elongated soldering face. For JBC tools T210, B.100, B.500.
JBC C210019: chisel tip 0.2 × 0.1 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T210, B.100, B.500.
JBC C210020: conical tip Ø 0.1 mm. The conical end provides point contact with an individual solder joint. For JBC tools T210, B.100, B.500.
JBC C210021: chisel tip 0.6 × 0.3 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T210, B.100, B.500.
JBC C210022: chisel tip 1.3 × 0.4 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T210, B.100, B.500.
JBC C210023: chisel tip 0.4 × 0.2 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T210, B.100, B.500.
JBC C210024: chisel tip 0.8 × 0.3 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T210, B.100, B.500.
JBC C210025: pin and connector tip Ø 1.1 mm. The special profile is designed for soldering connector contacts. For JBC tools T210, B.100, B.500.
JBC C210027: bevel tip Ø 1.5 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T210, B.100, B.500.
JBC C210028: spoon tip Ø 1 mm. The spoon-shaped recess holds solder at the working end. For JBC tools T210, B.100, B.500.
JBC C210029: spoon tip Ø 1.5 mm. The spoon-shaped recess holds solder at the working end. For JBC tools T210, B.100, B.500.
JBC C210030: spoon tip Ø 2 mm. The spoon-shaped recess holds solder at the working end. For JBC tools T210, B.100, B.500.
JBC C210031: bevel tip Ø 2 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T210, B.100, B.500.
JBC C210033: knife tip 2.5 × 0.3 mm. The knife profile combines a narrow edge with an elongated soldering face. For JBC tools T210, B.100, B.500.
JBC C210034: coating removal tip 1 mm. The tip removes coatings during electronics rework. It is not intended for soldering. For JBC tools T210, B.100, B.500.
JBC C210036: bevel tip Ø 0.6 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T210, B.100, B.500.
JBC C210038: barrel tip for cables Ø 0.8 mm. The concave end is shaped for soldering cable connections. For JBC tools T210, B.100, B.500.
JBC C210039: chisel tip 2.9 × 0.7 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T210, B.100, B.500.
JBC C210040: bevel tip Ø 2.9 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T210, B.100, B.500.
JBC C210041: bevel tip Ø 3.9 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T210, B.100, B.500.
JBC C210042: chisel tip 3.9 × 1 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T210, B.100, B.500.
The 0.6 mm conical tip has a straight working geometry for localized contact with the joint. For JBC T245 handles.
The special working face is designed for drag soldering QFP integrated circuits. For JBC T245 handles.
The PLCC Drag shape is intended for drag soldering integrated circuits with matching lead geometry. For JBC T245 handles.
The open forked Chip end is designed for desoldering chip components. Its designated size is 1.9 mm. For JBC T245 handles.
This forked Chip tip is intended for desoldering chip components. Match the working-end shape to the component terminals. For JBC T245 handles.
The open Chip end is intended for desoldering chip components. Match its 3.4 mm size to the specific component package. For JBC T245 handles.
This model provides an open 4.5 mm Chip end for desoldering chip components. For JBC T245 handles.
The fine 0.4 mm conical end is bent away from the tool axis, providing an angled contact approach. For JBC T245 handles.
The 0.3 mm diameter provides a fine conical end for positioning the tip on a small solder pad. For JBC T245 handles.
The straight conical geometry with a 0.4 mm diameter suits joints that require a narrow, unbent end. For JBC T245 handles.
The short bent end approaches the joint at an angle while retaining a fine 0.4 mm tip diameter. For JBC T245 handles.
The straight fine tip has a 0.5 mm end for targeted contact. Check the working profile against the clearance around the joint. For JBC T245 handles.
This special conical tip has an extended tinned surface, distinguishing it from a standard tip with the same 1 mm diameter. For JBC T245 handles.
JBC C245052: heat-staking tip for plastics Ø 4.9 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.
JBC C245053: heat-staking tip for plastics Ø 3.8 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.
JBC C245054: heat-staking tip for plastics Ø 6.5 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.
The 3.5 mm HT bevel combines a wider contact end with geometry designed for efficient heat transfer. For JBC T245 handles.
This straight chisel geometry measures 3 × 1 mm. C245761 is the bent alternative to this model. For JBC T245 handles.
The reduced tinned area is intended especially for touching up solder joints. For JBC T245 handles.
The 2.3 mm spoon face has a visible recess for working with solder. For JBC T245 handles.
This special chisel has extra iron plating. The manufacturer identifies it as particularly suitable for robotic applications. For JBC T245 handles.
JBC C245070E: chisel tip 5 × 1.7 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.
