Product sorting
List of products
The bridge-shaped end heats two ends of a connector simultaneously during rework. This model is intended for Faston terminals. For JBC T245 handles.
The 2 mm bevel has a reduced tinned area for targeted touch-up work on individual joints. For JBC T245 handles.
The 3 mm conical tip uses HT geometry for joints requiring efficient heat transfer. For JBC T245 handles.
JBC C245109: coating removal tip 4.3 mm. The tip removes coatings during electronics rework. It is not intended for soldering. For JBC tools T245.
JBC C245116: pin and connector tip R 1 mm. The special profile is designed for soldering connector contacts. For JBC tools T245.
JBC C245117: pin and connector tip Ø 1.45 mm. The special profile is designed for soldering connector contacts. For JBC tools T245.
JBC C245118: pin and connector tip 0.4 mm. The special profile is designed for soldering connector contacts. For JBC tools T245.
JBC C245119: PTFE-coated hole-punch tip for plastics Ø 1 mm. The PTFE-coated tip forms holes in plastic by heat. Its working temperature must remain below 200 °C. For JBC tools...
JBC C245121: cutting tip for plastics 13 mm. The heated blade is intended for cutting plastic materials. For JBC tools T245.
JBC C245122: pin and connector tip R 2 mm. The special profile is designed for soldering connector contacts. For JBC tools T245.
JBC C245123: heat-staking tip for plastics 4 × 4 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.
JBC C245124: heat-staking tip for plastics 4.25 × 2 mm. The tip transfers heat to plastic during heat staking. For JBC tools T245.
The bent working section has a distinctly offset fine end, combining a 0.4 mm diameter with access away from the tool axis. For JBC T245 handles.
JBC C245136: micro stick switch desoldering tip. The shaped tip desolders micro stick switches, for example during mobile device repairs. For JBC tools T245.
JBC C245138: cutting tip for plastics 12 mm. The heated blade is intended for cutting plastic materials. For JBC tools T245.
JBC C245143: double heat-staking tip for plastics Ø 1.8 mm. The twin working ends heat-form two plastic rivets. For JBC tools T245.
This chip-desoldering tip has a special tinned length of 3.5 mm. Its designated Chip size is 2.2 mm. For JBC T245 handles.
JBC C245155E: chisel tip 2.4 × 0.8 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.
JBC C245156E: bevel tip Ø 2.4 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T245.
JBC C245157E: knife tip 7.2 × 0.1 mm. The knife profile combines a narrow edge with an elongated soldering face. For JBC tools T245.
JBC C245158E: chisel tip 1.2 × 0.4 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.
JBC C245159E: chisel tip 0.8 × 0.4 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.
JBC C245160E: chisel tip 1.6 × 0.5 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.
JBC C245161E: chisel tip 3.2 × 0.8 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.
The hollow working end has a chrome finish for heat staking plastic rivets. For JBC T245 handles.
The Plastics Inox design is intended for plastic applications and has a cylindrical end measuring 1.7 mm in diameter. For JBC T245 handles.
JBC C245167: thermal hole-punch tip for plastics Ø 2.1 mm. The heated pointed end forms holes in plastic. For JBC tools T245.
JBC C245168: thermal hole-punch tip for plastics Ø 3.1 mm. The heated pointed end forms holes in plastic. For JBC tools T245.
The 1 × 0.5 mm chisel provides a small flat contact edge with a compact working profile. For JBC T245 handles.
The compact chisel is 1.8 mm wide and 0.5 mm thick, providing a wider contact edge than C245170. For JBC T245 handles.
JBC C245172E: bevel tip Ø 1 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T245.
JBC C245175E: bevel tip Ø 1.2 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T245.
JBC C245176E: bevel tip Ø 1.5 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T245.
JBC C245201: conical tip Ø 0.6 mm. The conical end provides point contact with an individual solder joint. For JBC tools T245, ALE250.
JBC C245215: dual-in-line tip 9.6 × 18 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.
JBC C245220: dual-in-line tip 5.4 × 6 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.
JBC C245221: dual-in-line tip 5.4 × 10 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.
JBC C245222: dual-in-line tip 7.1 × 13 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.
JBC C245223: QFP desoldering tip 8.5 × 8.5 mm. The shaped end desolders QFP and PLCC packages by contact heating their leads. For JBC tools T245.
JBC C245224: QFP desoldering tip 12 × 12 mm. The shaped end desolders QFP and PLCC packages by contact heating their leads. For JBC tools T245.
JBC C245226: dual-in-line tip 15.2 × 29 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.
JBC C245227: QFP desoldering tip 17.5 × 17.5 mm. The shaped end desolders QFP and PLCC packages by contact heating their leads. For JBC tools T245.
JBC C245228: QFP desoldering tip 12.4 × 15 mm. The shaped end desolders QFP and PLCC packages by contact heating their leads. For JBC tools T245.
JBC C245230: conical tip Ø 0.3 mm. The conical end provides point contact with an individual solder joint. For JBC tools T245, ALE250.
JBC C245234: bent conical tip Ø 0.4 mm. The bent end provides angled access to the joint. For JBC tools T245.
The square 17 × 17 mm working end is designed for PLCC sockets with 44 contact positions. For JBC T245 handles.
The special rectangular end is designed for PLCC sockets with 32 contact positions. For JBC T245 handles.
JBC C245250: dual-in-line tip 5.4 × 8 mm. Two opposing contact sides serve components with two rows of leads. For JBC tools T245.
JBC C245256: bevel tip Ø 3.5 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T245, ALE250.
The 1.5 mm conical end is bent for angled contact. Allow for the bend when checking clearance around the joint. For JBC T245 handles.
