Product sorting
List of products
The 2.2 × 1 mm chisel has a straight end for flat contact. C245407 offers an HT version at these dimensions. For JBC T245 handles.
The 4.8 × 1.5 mm HT chisel provides broad flat contact with optimized thermal geometry. For JBC T245 handles.
JBC C245909E: bent conical tip Ø 1 mm. The bent end provides angled access to the joint. For JBC tools T245.
The chisel has a broad tinned area. The manufacturer classifies it as a model with optimized thermal geometry. For JBC T245 handles.
The 3 mm diameter and bevelled face provide a broader working end than the fine bevel models in the C245 range. For JBC T245 handles.
The 21 mm blade provides a very broad continuous contact edge. Allow space for the complete working end when selecting it. For JBC T245 handles.
The straight 10 mm blade has a transversely widened end for contact along a continuous edge. For JBC T245 handles.
The fine bent end has a 0.6 mm diameter and provides an angled approach where surrounding components restrict straight access. For JBC T245 handles.
The straight conical end has a 0.5 mm diameter for fine contact along the tool axis. For JBC T245 handles.
The 2.7 mm Mini Spoon end combines an oval working face with a recess. For JBC T245 handles.
The 2.2 mm conical end has a straight rounded profile for general soldering with a larger contact tip. For JBC T245 handles.
The bent 0.8 mm conical tip provides angled access with a narrow rounded end. For JBC T245 handles.
The 0.6 mm conical end is part of an HT design, combining fine contact with optimized heat transfer. For JBC T245 handles.
The 3.8 mm spoon end has a larger oval recessed working face than the fine Mini Spoon models. For JBC T245 handles.
JBC C245939: knife tip 6 × 0.4 mm. The knife profile combines a narrow edge with an elongated soldering face. For JBC tools T245.
JBC C245940: knife tip 6 × 3 mm. The knife profile combines a narrow edge with an elongated soldering face. For JBC tools T245.
The knife end has a sharp edge and measures 6 × 1 mm. The drawing shows the blade orientation. For JBC T245 handles.
The straight 1.7 mm conical end provides a larger contact tip than fine models below 1 mm. For JBC T245 handles.
The straight 1.8 × 0.8 mm chisel provides a flat working end and is thicker than C245171 at the same width. For JBC T245 handles.
The angled face at the 2.2 mm end provides bevel contact for general soldering work. For JBC T245 handles.
The flat 2.2 × 1 mm working end is bent, combining a wider contact edge with an angled approach. For JBC T245 handles.
JBC C245949: blade tip 32 mm. The broad blade provides contact along an extended soldering area. For JBC tools T245.
The 3.8 mm bevel uses HT geometry for joints with greater heat-transfer requirements. For JBC T245 handles.
JBC C245952E: bevel tip Ø 3.8 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools T245.
JBC C245955: knife tip 13 × 0.5 mm. The knife profile combines a narrow edge with an elongated soldering face. For JBC tools T245.
The straight 0.8 mm conical tip is wider than C245001 while retaining a narrow rounded end. For JBC T245 handles.
This bent chisel combines a 1.2 × 0.7 mm end with an angled approach to the joint. For JBC T245 handles.
The 1.8 × 0.8 mm bent chisel has a wider working end than C245962 while retaining an angled approach. For JBC T245 handles.
The mini-spoon end has a recess in its working face. Match the 1.9 mm diameter to the area being soldered. For JBC T245 handles.
The broad 6.6 × 1.8 mm chisel provides a flat contact edge and an HT design for thermally demanding soldering. For JBC T245 handles.
The flat end is 5 mm wide and 1 mm thick. The HT design supports heat transfer through this broad contact edge. For JBC T245 handles.
JBC C245968E: chisel tip 6.6 × 1.8 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools T245.
JBC C245SP01: solder pot cartridge 18 × 15 mm. The solder pot cartridge tins wires and component leads and can desolder multipin through-hole components. For JBC tools T245.
JBC C250401: bent conical tip Ø 0.6 mm. The bent end provides angled access to the joint. For JBC tools ALE250, AP250.
JBC C250402: bent conical tip Ø 0.8 mm. The bent end provides angled access to the joint. For JBC tools ALE250, AP250.
JBC C250403: bent conical tip Ø 1 mm. The bent end provides angled access to the joint. For JBC tools ALE250, AP250.
JBC C250404: bent chisel tip 1.2 × 0.7 mm. The bent chisel combines a flat contact with angled access to the joint. For JBC tools ALE250, AP250.
JBC C250405: bent chisel tip 1.8 × 0.8 mm. The bent chisel combines a flat contact with angled access to the joint. For JBC tools ALE250, AP250.
JBC C250406: bent chisel tip 2.2 × 1 mm. The bent chisel combines a flat contact with angled access to the joint. For JBC tools ALE250, AP250.
JBC C250407: chisel tip 1.2 × 0.7 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools ALE250, AP250.
JBC C250408: chisel tip 2.2 × 1 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools ALE250, AP250.
JBC C250409: bent conical tip Ø 1.7 mm. The bent end provides angled access to the joint. For JBC tools ALE250, AP250.
JBC C250410: bent conical tip Ø 2.2 mm. The bent end provides angled access to the joint. For JBC tools ALE250, AP250.
JBC C250411: chisel tip 4.8 × 1.5 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools ALE250, AP250.
JBC C250412: bent chisel tip 4.8 × 1.5 mm. The bent chisel combines a flat contact with angled access to the joint. For JBC tools ALE250, AP250.
JBC C250413: chisel tip 2.2 × 1 mm. The flat end can contact a solder pad along its edge or across its broader face. For JBC tools ALE250, AP250.
JBC C250414: bevel tip Ø 2.2 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools ALE250, AP250.
JBC C250415: bevel tip Ø 3.8 mm. The bevel provides a contact face for soldering with the handle held at an angle. For JBC tools ALE250, AP250.
JBC C250418: bent chisel tip 3.2 × 1.5 mm. The bent chisel combines a flat contact with angled access to the joint. For JBC tools ALE250, AP250.
JBC C250420: bent conical tip Ø 0.4 mm. The bent end provides angled access to the joint. For JBC tools ALE250, AP250.
